Filter
Top Products
Hard Drive Maintenance
If a drive on your Seagate Personal Cloud 2-Bay fails, and you have configured your device for maximum
protection, you can replace it; your content is safe on the other drive.
Precautions
Remove a hard drive
Install a hard drive
Create a new volume
Precauons
Except for replacing a hard drive, performing maintenance within the enclosure is not supported and can
void your product's warranty.
During operation, the drives should remain in place for optimal airflow.
Observe all conventional ESD precautions when handling the Personal Cloud 2-Bay’s parts. Avoid contact
with backplane components and module connectors, etc.
Replace an existing or faulty hard drive with a hard drive of equal capacity.
When handling hard drives, make sure that they are placed (and stored) on a cushioned surface.
Remove a hard drive
Disconnect power from the device before removing a hard drive.
1. Push the button on the back of your Personal Cloud 2-Bay.
Important info: Refer to the warranty before performing hardware repairs or maintenance not
described in this manual.
35Seagate Personal Cloud 2-Bay
5/13/15