Filter
Top Products
132
Network Notification
Have your device alert you to new Wireless Access Points
(WAPs).
1. From a Home screen, touch
(Menu)
➔
Settings
➔
Wireless and network
.
2. Touch
Wi-Fi settings
, then touch
Network notification
to
turn notifications On or Off. When on, a check mark
appears in the check box.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for
easy and secure wireless network set up and connections. To
use WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS
can automatically set up a random network name and WPA
wireless security for wireless Wi-Fi phones, routers, access
points, computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a
network name and wireless security PIN.
1. From a Home screen, touch
(Menu)
➔
Settings
➔
Wireless and network
➔
Wi-Fi settings
.
2. Touch
WPS button connection
.
3. Press the WPS button on your Wi-Fi access point within
2 minutes.
Advanced Settings
Set up and manage wireless access points.
1. From a Home screen, touch
(Menu)
➔
Settings
➔
Wireless and network
➔
Wi-Fi settings
.
2. Touch
(Menu)
➔
Advanced
for these settings:
• Advanced
:
–
Wi-Fi sleep policy
: By default, Wi-Fi turns off when the screen
times out and data connections switch to mobile data. Use Wi-Fi
sleep policy settings to specify when to switch from Wi-Fi to
mobile data for data communications. Touch to choose from
When screen turns off
,
Never when plugged in
, or
Never
.
–
MAC address
: View your device’s MAC address, required
when connecting to some secured networks (not configurable).
–
IP address
: The Internet Protocol (IP) address assigned to the
device by the Wi-Fi network to which you are connected unless
the IP settings, below, are used to assign it a static IP address.