Chapter 1: Connections & Setup
Chapter 1 3
Installing the Player in the Car
1. Rest the player in the center of the rear seat.
2. Insert the center seat’s (lap) safety belt through the player’s retainer holes.
Important Note: Secure the player with the lap seat belt as tight as possible so that the player does not
move around.
3. Fasten seat belt strap by inserting and passing it through the player’s two slot openings.
4. Plug the DC power cable into the DC POWER (CAR) jack on the back of the player. Attach the
other end of the cable to the car’s cigarette lighter socket.
Note: Make sure the car’s ignition is on before plugging the DC power cord into the cigarette lighter
socket.
5. Adjust the LCD screen for desired viewing.
6. If desired, connect headphones to either of the two headphone jacks on the back of the player.
Notes: When the player is not in use, the LCD screen should be closed firmly.
Do not place objects in the front storage compartment other than the supplied AC power cord or DC
power cord.
Using the Player in a Hotel, Office or Home
1. Place the bottom of the player carefully on a table or other resting surface.
2. Plug the AC power cable into the AC POWER (HOME) jack on the back of the player. Attach
the other end of the power cord to a standard wall outlet. Make sure to insert the blades of the
power cord fully into the wall outlet.
3. Adjust the LCD screen for desired viewing.
4. If desired, connect headphones to either of the two headphone jacks on the back of the player.