Filter
Top Products
Chapter 3: Other Information
Chapter 3 27
Play starts, but then stops immediately
• The disc is dirty. Clean it.
• Condensation has formed. Allow player to dry out.
No sound or distorted sound.
• Make sure your mobile DVD player is connected properly. Make sure all cables are securely inserted into the appropriate jacks.
• If you connected an audio or audio/video component to your player, make sure you chose the correct input setting on the
receiver and unit.
Can’t advance through a movie
• You can’t advance through the opening credits and warning information that appear at the beginning of movies because the disc
is programmed to prohibit that action.
The
invalid
symbol (hand icon) appears on screen
• The feature or action cannot be completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number that is out of range.
Picture is distorted
• The disc might be damaged. Try another disc.
• It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan
• Some discs have sections that prohibit rapid scanning, or title and chapter skip.
• If you try to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the
movie is often programmed to prohibit skipping through it.
Subtitle and/or audio language is not the one selected from the initial setting
• If the subtitle and/or audio language does not exist on the disc, the initial settings will not be seen or heard. The disc’s priority
language is selected instead. Set the subtitle and/or audio language manually through the Info Display, if available.
Camera angle cannot be changed
• Some discs don’t have the multi-camera angle system, and some discs only have it in certain parts of the movie.