Filter
Top Products
Using different
entertainment displays
You can enjoy entertainment displays while lis-
tening to each sound source.
% Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Source icon displayBack ground visual 1
Back ground visual 2Back ground visual 3
Back ground visual 4Back ground picture
1Back ground picture 2Movie screen 1
Movie screen 2Level meter 1Level meter 2
Entertainment clock
Rewriting the
entertainment displays
You can rewrite the entertainment display.
Please create or download the data using your
Computer, and record it on CD-R. For details,
please visit
http://www.pioneer.co.jp/car/pclink3b/.
Important
Once the rewriting processhas started, do not
open the front panelor turn the ignition off, until
it is completed.
1 Press SOURCE and hold until the unit
turns off.
2 Press and hold ENTERTAINMENT and
DISPLAY until the unit goes into download
mode.
Front panel is opened automatically and then
DOWNLOAD READY and INSERT DISC is dis-
played.
! If a disc is loaded inthe unit, it is ejected
automatically.
3 Insert the disc containing the rewritten
data into the CD loading slot.
DOWNLOAD READY appears in the display,
and then data rewriting will start automati-
cally. NOW LOADING is displayed during re-
writing.
CD loadingslot
4 After FINHSHED is displayed, press
EJECT to open the front panel and eject the
disc.
Download mode is exited and unit turns off.
Notes
! Do not insert anythingother than a CD into
the CD loading slot.
! It can take severalminutes to complete this
operation.
! During download mode,buttons other than
EJECT are inactive.
! To cancel downloadmode, press EJECT.
! If the rewriting processdoes not operate prop-
erly, an errormessage such as CD ERROR
may be displayed.Refer to Understanding
error message on rewriting theentertainment
displays on page 56.
Using the PGM button
You can operate the preprogrammed functions
for each source by using PGM on the remote
control.
Other Functions
En
54
Section
12