Filter
Top Products
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Use Multi-Control to select Scan.
Scan appears in the display.
2 Press Multi-Control to turn scan play
on.
Scan:ON appears in the display. The first 10
seconds of each track is played.
3 When you find the desired track press
Multi-Control to turn scan play off.
Scan:OFF appears in the display. The track
will continue to play.
# If the display has automatically returnedto
the playback display, select Scan again by using
Multi-Control.
Note
After scanning of a CD is finished, normal play-
back of the trackswill begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Use Multi-Control to select Pause.
Pause appears in the display.
2 Press Multi-Control to turn pause on.
Pause:ON appears in the display. Play of the
current track pauses.
# To turn pause off, press Multi-Control
again.
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use Multi-Control to select FF/REV.
FF/REV appears in the display.
# If the search method ROUGHSEARCH has
been previously selected,ROUGH SEARCH will
be displayed.
2 Press Multi-Control to select the search
method.
Press Multi-Control until the desired search
method appears in the display.
! FF/REV Fast forward and reverse
! ROUGH SEARCH Searching every 10
tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method
ROUGH SEARCH.
Refer to Selecting the search method on this
page.
2 Push and hold Multi-Control left or
right to search every 10 tracks on a disc.
# If a disc containsless than 10 tracks, pushing
and holding Multi-Control right recallsthe last
track of the disc.Also, if the remaining numberof
tracks after searching every 10 tracks is less than
10, pushing and holdingMulti-Control right re-
calls the last trackof the disc.
# If a disc containsless than 10 tracks, pushing
and holding Multi-Control left recalls thefirst
Built-in CD Player
En
20
Section
05