Filter
Top Products
Setting the sound focus
equalizer (SFEQ)
Clarifying the sound image of vocals and in-
struments allows the simple staging of a nat-
ural, pleasant sound environment. Even
greater listening enjoyment will be obtained if
seating positions are chosen carefully. FRT1
boosts the treble on the front output and the
bass on the rear output. FRT2 boosts the treble
and the bass on the front output and the bass
on the rear output. (The bass boost is the
same for both front and rear.) For both FRT1
and FRT2, H setting provides a more pro-
nounced effect than L setting.
1 Press EQ-EX and hold to switch to SFEQ
function.
Press EQ-EX and hold until SFEQ indicator ap-
pears in the display.
# To switch to EQ-EXfunction, press EQ-EX and
hold.
2 Press EQ-EX to select the desired SFEQ
setting.
Press EQ-EX repeatedly to switch between the
following settings:
FRT1-H (front 1-high)FRT1-L (front 1-low)
FRT2-H (front 2-high)FRT2-L (front 2-low)
CUSTOM (custom)SFEQ OFF (off)
3 Push Multi-Control left or right to select
the desired position.
Push Multi-Control left or right until the de-
sired position appears in the display.
LEFT (left)CENTER (center)RIGHT (right)
Notes
! If you adjust the bassor treble, CUSTOM
memorizes an SFEQ settingin which the bass
and treble are adjusted for personalprefer-
ence.
! If you switch the SFEQsetting, the HPF func-
tion is automatically turned off. By turning the
HPF function onafter selecting the SFEQset-
ting, you can combineHPF function with
SFEQ function.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Use Multi-Control to select Fad.
Fad appears in the display.
# If the balance settinghas been previously ad-
justed, Bal will bedisplayed.
2 Push Multi-Control up or down to ad-
just front/rear speaker balance.
Each pushing Multi-Control up or down
moves the front/rear speaker balance towards
the front or the rear.
Fad F 15 Fad R 15 is displayed as the front/
rear speaker balance moves from front to rear.
# Fad F/R 0 isthe proper setting when onlytwo
speakers are used.
# When the rear outputsetting is
REAR SP:S/W, you cannot adjustfront/rear
speaker balance. Referto Setting the rear output
and subwoofer controller on page51.
3 Push Multi-Control left or right to ad-
just left/right speaker balance.
Each pushing Multi-Control left or right
moves the left/right speaker balance towards
the left or the right.
Bal L 9 Bal R 9 is displayed as the left/right
speaker balance moves from left to right.
Audio Adjustments
En
43
English
Section
10