Filter
Top Products
! There is sometimesa delay between starting
up CD playbackand the sound being issued.
When being read in, FormatRead is dis-
played.
! If you cannot insert adisc completely or if
after you insert a disc the discdoes not play,
check that the labelside of the disc is up.
Press EJECT to ejectthe disc, and check the
disc for damage beforeinserting it again.
! If the built-in CD playerdoes not operate prop-
erly, an errormessage such as ERROR-11
may be displayed.Refer to Understanding
built-in CD player error messageson page 56.
! You caneject the CD by pressingand holding
EJECT with openingthe front panel when the
CD loading or ejectingcannot operate proper-
ly.
Adjusting the volume
% Use Multi-Control to adjust the sound
level.
With the head unit, rotate Multi-Control to in-
crease or decrease the volume.
With the remote control, press VOLUME to in-
crease or decrease the volume.
Volume bar and power output mode (40Wor
60W) are displayed while volume is adjusted.
! Please refer to theinstallation manual for
the power setting switch.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
Basic Operations
En
13
English
Section
03