Filter
Top Products
48
Chapter 3
Editing the Navigation Utilities
will be displayed. When the angle of the
navigation unit has been changed, “Exces-
sive vibration” will be displayed.
4. Parking brake
When the parking brake is applied, “On” is
displayed. When the parking brake is
released, “Off” is displayed.
5. Power Voltage
The power supply (reference value) pro-
vided from the vehicle battery to the naviga-
tion system is shown. If the voltage does
not fall within the range of 11 to 15V, check
that power cable connection is correct.
6. Illumination
When the headlights or small lamps of a
vehicle are on, “On” is displayed. (If the
orange/white lead is not connected, “Off”
appears.)
7. Back Signal
When the gear lever is shifted to “R”, the
signal switches to “High” or “Low”. (Which
of these is displayed depends on the vehi-
cle.)