Panasonic AJ-SD255 MP3 Player User Manual


 
33
Setup menus (continued)
No./Item Description No./Item Description
USER menu <DIF>
880
DIF SPEED
This sets the transfer rate of the
IEEE1394 digital interface output.
0000
S100 : 100 Mbps
0001 S200 : 200 Mbps
0002 S400 : 400 Mbps
881
DIF TYPE
(For AJ-SD255P)
This sets the format when the
IEEE1394 digital signals are output.
0000 DVCPRO :
The signals are forcibly output in the
DVCPRO format.
0001 DV :
The signals are forcibly output in the
DV format.
0002
AUTO :
The same format as that of the
playback tape is set.
882
DIF IN CH
This sets the IEEE1394 digital input
channel.
0-63: These channels are fixed to
assigned values.
0064
AUTO
:
The channel is not fixed to assigned
values. When the power is turned on,
the input channel is initialized to 63.
0000 0
::
0063 63
883
DIF OUT CH
This sets the IEEE1394 digital output
channel.
0-63: These channels are fixed to
assigned values.
0064
AUTO :
The channel is not fixed to assigned
values. When the power is turned on,
the output channel is initialized to 63.
0000 0
::
0063 63
886
DIF CONFIG
This menu item is used to support
future expansion. Normally, DFLT is
used as the setting.
0000
DFLT
0001 1
::
0255 255
889
DIF AUD IN
(For AJ-SD255P)
This selects the channels to be used
for recording on the tape when DV
format data with audio signals in the
4CH mode are to be input and then
recorded on a DVCPRO tape.
0000
CH1&2 :
Received DV format data CH1 and
CH2 are selected.
0001 CH3&4 :
Received DV format data CH3 and
CH4 are selected.
891
DIF DV AUDIO
This sets the forced audio mode
conversion when a DV tape is played
and its signals are output in the DV
format.
0000
THRU : Normal (through)
0001 LOCK :
The audio mode is forcibly converted
to the LOCK mode. (The frequency is
not converted.)
0002 LOCK48 :
The audio mode is forcibly converted
to 48 kHz/2CH/LOCK.
890
DIF AUD OUT
(For AJ-SD255P)
This selects the channels when a DV
tape with audio signals in the 4CH
mode is played and the signals are
output in the DVCPRO format or when
LOCK48 has been selected as the
setup menu item No.891 (DIF DV
AUDIO) setting.
(For AJ-SD255E)
When setup menu No. 891 (DIF DV
AUDIO) is set to LOCK48, this selects
the output channels for playing back
the DV tape with audio signals in 4CH
mode.
0000
CH1&2 :
DV tape CH1 and CH2 are selected.
0001 CH3&4 :
DV tape CH3 and CH4 are selected.
The underlined items indicates the initial setting.
YAD255G
YAD255G
YAD255G
YAD255G
YAD255G
This appears only when the optional board
AJ-YAD255G has been installed.
YAD255G
YAD255G
YAD255G
YAD255G