Filter
Top Products
21
Setup menus (continued)
No./Item Description
008
DISPLAY SEL
This selects what information is to be
provided by the time code and other
super displays output to the VIDEO
MON connector.
0000 TIME : Data only.
(The data indicates the value for
whichever of CTL, TC or UB currently
selected by the COUNTER button.)
0001
T&STA :
Data and operation status.
0002 T&S&M :
Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE
(year/month/day)
0005 T&MDY :
Data and REC DATE
(month/day/year)
0006 T&DMY :
Data and REC DATE
(day/month/year)
0007 T&UB :
Data and user bit.
However, when UB has been selected
with the COUNTER button, the time
code is displayed after the user bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been
selected with the COUNTER button,
the time code is displayed after the
CTL data.
0009 T&T :
The data and time code recorded in
the VAUX area are displayed.
0010 VITC:
The time code and user bit recorded in
the VAUX area are displayed.
Notes:
•Mode display:
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
•An error message appears if a warning
or error has occurred when “T&S&M”
has been selected as this setting.
•
REC TIME and REC DATE are displayed
during DV/DVCAM, playback only. With
the DVCPRO (25 Mbps) format, the
operating mode is
displayed.
No./Item Description
001
LOCAL ENA
This selects the buttons which can be
operated on the front panel when the
CONTROL switch has been set to
REMOTE.
0000 DIS :
No buttons can be operated.
0001
ST&EJ :
Only the STOP and EJECT buttons
can be operated.
0002 ENA :
All buttons can be operated.
002
TAPE TIMER
This selects the 12 or 24 hour display
for the CTL counter.
0000
±12h : 12 hour display
0001 24h : 24 hour display
003
REMAIN SEL
This selects whether the remaining
tape time and total tape length are to
be displayed in the superimposed
display of the VIDEO MON connector
signals.
0000 OFF: No display.
0001
2L :
The remaining tape time is displayed
on the second line.
0002 1L :
The remaining tape time is displayed
on the first line.
0003 R/TTL :
The remaining tape time is displayed
on the first line, and the total tape
length is displayed in the second line.
Notes:
• When “2L” is selected, the remaining
tape time is not displayed if “TIME” or
“VITC” has been selected as the setup
menu item No.008 (DISPLAY SEL)
setting.
• When “R/TTL” is selected, the total tape
length is not displayed if “TIME” or
“VITC” has been selected as the setup
menu item No.008 (DISPLAY SEL)
setting.
USER menu <BASIC>
The underlined items indicates the initial setting.