Filter
Top Products
29
Setup menus (continued)
660
UMID REC
This selects whether or not to record
the UMID information on the tape.
0000 OFF :
UMID information is not recorded on
the tape.
0001
ON :
UMID information is recorded on the
tape.
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT button,
UMID will not be recorded even when it is
set to ON unless the input signal can be
detected.
624
CC REC
(For AJ-SD255P)
For selecting whether to record the
closed caption signals multiplexed on
the input signals on the tape.
0000 OFF :
No closed caption signal is recorded.
0001
ON :
When a closed caption signal is
detected from the selected input
signal, it can be recorded.
Note:
If 1394 signals have been selected as the
input signals using the INPUT SELECT
button, the closed caption signals which
have been multiplexed onto the input
signals will be recorded on the tape
regardless of the setting.
645
WIDE
SELECT
This selects whether or not to record the
wide-screen information on the tape.
0001 WIDE :
The wide-screen information is
recorded on the tape.
0002
NORMAL :
The wide-screen information is not
recorded on the tape.
Notes:
• If 1394 has been selected as the input
signals using the INPUT SELECT
button, the wide-screen information on
the input signals will be recorded
regardless of this menu’s setting.
• With input signals other than 1394
signals, the wide signals will not be
detected. Select WIDE as the setting
when recording the wide-screen
information on the tape.
• Regardless of the above setting, the
wide-screen information cannot be
superimposed onto tape playback and
output.
No./Item Description
USER menu <VIDEO>
No./Item Description
662
UMID POS
This sets the line on which the UMID
information is to be superimposed.
Notes:
• The line selected for the setup menu
item No. 501 (VITC POS-1) and No. 502
(VITC POS-2) settings cannot be
selected for this item.
• The default settings are not restored
even if the RESET button is pressed
while holding down the SEARCH button.
(For AJ-SD255E)
0000 BLANK
0001 8L
::
0010
17L
::
0015 22L
(For AJ-SD255P)
0000 BLANK
0001 12L
::
0006
17L
::
0008 19L
YA94G
661
UMID GEN
This selects the basic UMID
information to be recorded on the tape
when ON has been selected as the
setup menu item No. 660 (UMID REC)
setting.
0000 INT :
Newly created basic UMID information
of this unit is always recorded.
0001
EXT :
The basic UMID information of the
input signals is recorded.
Newly created basic UMID information
of this unit is recorded if there is no
basic UMID information on the input
signals.
Note:
The source pack (of the UMID
information) of the input signal will be
recorded on the tape, regardless of this
menu’s setting.
YAD255G
YA94G
The underlined items indicates the initial setting.
YA94G
This appears only when the optional board
AJ-YAD255G has been installed.
This appears only when the optional board
AJ-YA94G has been installed.
YAD255G