Filter
Top Products
28
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu <VIDEO>
No./Item Description
600
INT SG
This selects the internal reference
signal.
0001 BB :
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003
CB75 :
75% color bars are generated.
602
V-MUTE
SEL
This selects whether to mute the video
output signals when a blank on the
tape has been detected during
playback.
0000 N-MUTE : No muting. (Freeze)
0001
LOW RF :Muting. (Set to gray.)
603
CC (F1)
BLANK
(For AJ-SD255P)
This selects ON or OFF for the closed
caption signal of the first field.
0000 BLANK :
Signal is forcibly blanked.
0001 THRU :Signal is not blanked.
604
CC (F2)
BLANK
(For AJ-SD255P)
This selects ON or OFF for the closed
caption signal of the second field.
0000 BLANK :
Signal is forcibly blanked.
0001 THRU :Signal is not blanked.
605
FREEZE SEL
This selects the freeze mode for still
pictures.
0000
FIELD : Field freeze.
0001 FRAME : Frame freeze.
Note:
When frame freeze has been selected,
the frame slow status is established with
the slow setting.
609
EDH
This selects whether to superimpose
EDH onto the SDI output signals.
0000 OFF : EDH is not superimposed.
0001
ON : EDH is superimposed.
610
P
B/PR IN LV
(For AJ-SD255P)
This selects the analog component
input level.
0000 M : M level
0001
B-CAM : ß-CAM level
614
P
B/PR OUT
LV
(For AJ-SD255P)
This selects the analog component
output level.
0000 M : M level
0001
B-CAM : ß-CAM level
No./Item Description
622
SETUP
(For AJ-SD255P)
For setting 7.5% setup processing to
be performed on input and output
signals.
When the STOP button is pressed,
operation is transferred to the sub-screen,
and the setup level is set for each output.
To return from the sub-screen, press the
STOP button again.
00
CMPST IN
This selects the 7.5% setup processing for
the input composite and S-Video signal.
0000 THRU :
The signal is recorded in its original
form.
0001
CUT :
The signal is recorded with the 7.5%
setup removed.
01
CMPST OUT
This selects the 7.5% setup processing for
the input composite and S-Video signal.
0000 THRU :
The signal is output in its original form.
0001
ADD :
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 622 (SETUP).
02
CMPNT IN
This selects the 7.5% setup processing
for the input component signal.
0000
THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the 7.5%
setup removed.
03
CMPNT OUT
This selects the 7.5% setup
processing for the output composite,
component and serial (digital) signal.
0000
THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added.
Sub-screen
YA94G
YA94G
This appears only when the optional board
AJ-YA94G has been installed.