MicroNet Technology 5 Portable Media Storage User Manual


 
RAIDBank5 Owner’s Manual
8
What’s Included
Your RAIDBank5 comes with the following items:
1x RAIDBank5 unit
5x Disk Drive Modules
1x SATA to eSATA cable Kit
1x eSATA to eSATA cable
1x USB3.0 Type A to B cable
1x 1394a to 1394a cable
1x 1394b to 1394b cable
1x Fan Module
1x User’s Manual and software CD
1x Power Cord
1x Quick Installation Guide
Choosing a location for your RAIDBank5
When selecting a place to set up your RAIDBank5, be sure to follow these guidelines:
• Place on a flat and stable surface capable of supporting at least 25lbs
• Place the RAIDBank5 close enough to the computer for the host connection cable to reach.
• Use a grounded wall outlet
• Avoid an electrical outlet controlled by wall switches or automatic timers. Accidental disruption
of the power source may wipe out data in the memory of your computer or RAIDBank5
• Keep the entire system away from potential sources of electromagnetic interference, such
as loudspeakers, cordless telephones, etc
CAUTION! Avoid direct sunlight, excessive heat, moisture, shock and
vibration, or dust
!
Installing the Fan Module
Before turning on the RAIDBank5, make sure to unpack and
install the fan module as illustrated right. Simply line up the
fan with the power connector (bottom edge) and the
securing clip slots (left and right,) and gently push the
fan evenly until the securing clips click into place.
1-Getting Started