Filter
Top Products
6 Matrox G450 MMS – User Guide
Your Matrox card is now installed. Restart your computer and install your Matrox software (see
“Software installation”, page 7).
Note:
Monitors are numbered consecutively based on which
connector each is attached to. Numbering starts with the
primary
display –
the one that first displays information when you restart your
computer. If another graphics card is installed in your computer,
display numbering may be different.
Note:
To connect a
digital
monitor (a
monitor that uses digital input, usually a
flat panel monitor) to your Matrox
product, your monitor must have a DVI
connector.
Some monitors with DVI connectors
support both digital and analog input. If
you’re using one of these monitors with
your Matrox product, make sure it’s configured to use the correct type of input. For more
information, see your monitor documentation.
DVI connector
(digital)
HD-15 connector (analog)
DVI connector
(analog/digital)