Filter
Top Products
Matrox G450 MMS – User Guide 15
4
Restart your computer normally.
5
Make sure the correct monitor is selected in Windows (see “Monitor setup”, page 8).
6
Make sure you’re not using inappropriate monitor setting customizations: Access the
PowerDesk
Monitor Settings
property sheet (see “Accessing PowerDesk property sheets”,
page 8), then click
Delete all customizations
.
7
If necessary, restore your original display settings (see steps 2 and 3).
2
Windows NT 4.0
–
1
If your primary display is unusable, restart your computer in VGA mode (see “Restarting
in VGA mode”, page 11).
2
Right-click the Windows desktop background, then click
Properties
"
Settings
.
Windows may prompt you that the display settings are incorrect for the current mode;
click
OK
to continue.
3
Move the
Desktop area
slider down to its lowest setting, then click
OK
.
4
Restart your computer normally.
5
With the Matrox PowerDesk
Monitor
property sheet, select monitor settings for each
display, then adjust your display settings. For more information, see the Matrox
PowerDesk online documentation.
6
If necessary, restore your original display settings (see steps 2 and 3).
2
Cause
Files on your system may have been deleted or corrupted.
1
Solution
Remove, then restore Matrox software:
Windows 2000/XP or NT 4.0 –
1
If your primary display is currently unusable, restart your computer in safe mode or
VGA mode (see “Restarting in VGA mode”, page 11).
Note:
In multi-display mode, each display has its own monitor settings (refresh rates).
Make sure correct software monitor settings are selected for
each
monitor.
Note:
Before removing software, make sure you have all the necessary files to reinstall
software that may still be needed. Also, make sure the display driver you reinstall supports
all
Matrox products in your computer.