Filter
Top Products
User’s Manual 6-11
Power and Power-Up Modes
6. Unlock the Battery Pack Lock.
Removing the battery pack-1
7. Slide the battery pack latch to the left, then pull the battery out of the
battery bay.
Removing the battery pack-2
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
1
3
2
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.