Filter
Top Products
67
206-4207
SAP
Analog Mode: Selects MTS sound (Mono,
Stereo, or SAP). DTV Mode: Changes the audio
language, if additional languages are available. *
INFO
Displays channel information.
**
CC
Activates subtitles, unless the Channel
Preview/Banks Setup Menu is currently on the
screen, in which case this option displays the
Lock (V-Chip) Menu.
NUMBER Buttons (0 - 9) & DASH
Use to enter a channel or program number.
Dash is used for sub-channel numbers such as
9-1, 9-2, etc.
FLASHBK (Flashback)
Returns to the previously tuned channel.
Up/Down/Left/Right Arrows
Use to navigate on-screen menus and adjust
TV settings.
TIMER
Sets the amount of time before the TV
automatically turns itself Off.
MENU
Displays and removes the TV setup menus (or,
if applicable, the Function Menu).
ALARM
Enables users to schedule a one-time “alarm”
event, in which the TV turns itself On at the
user-specified time.
MUTE
POWER
BANK
GUIDE
CH
PREVIEW
SAP
INFO
CC
OK
VOL
CH
CH
VOL
FLASHBK
TIMER
ALARM
MENU
ADJ
ADJ ADJ
ADJ
BED1
BED2
An LG Installer Remote (p/n: 124-213-07) is required to set up and operate the TV. The LG Installer Remote
illustrated below shows typical remote control functions and is provided for reference only. This Installer
Remote may vary from the Installer Remote supplied with the TV.
Reference: Installer Remote Control Typical Key Functions
POWER
Turns the TV On or Off.
BANK
Selects Channel Bank 1, 2, 3, or 4.
CH PREVIEW
Displays and exits the
Channel Preview/Banks
Setup Menu.
GUIDE
Function not supported on these TVs.
CHANNEL UP/DOWN
Changes channels based on channels in
the channel lineup.
VOLUME UP/DOWN
Increases/decreases sound level.
OK (Enter)
Use to direct tune channels and also to adjust TV
settings.
MUTE
Switches sound On or Off.
SAP notes:
• SAP settings are retained for individual analog
channels when TV is turned Off/On.
• If SAP is selected and no SAP is provided, sound
may not be heard on channel.
• Each analog channel may have its own SAP setting.
• Digital channels will reset to default audio language
when TV is turned Off/On.
The INFO feature is only applicable if the TV is
congured for Pro:Centric operation.
*
Bed Switch
Set to Bed 1 or Bed 2 as applicable (per
Installer Menu item 027 HOSPITAL MODE
setting).
**