Filter
Top Products
13
206-4207
(Continued from previous page)
7. Edit the Channel Map.
This option enables you to add/delete channels, select channel
icons, add channel labels, and/or set up channel banks before the
Channel Map is transferred to the PTC (see step 8).
Note: The maximum number of channels (analog, digital,
and Aux inputs) that can be transferred to the PTC is
141. An attempt to transfer more than 141 channels of
any combination will result in a PTC Channel Map of
exactly 141 channels; any extra channels will not be
available in the PTC Channel Map. For example, if you
enabled three Aux inputs in step 2 and the Auto Search
found 141 channels, you must edit the Channel Map to
decrease the number of analog/digital channels to (at
most) 138 in order to accommodate the Aux inputs in the
PTC Channel Map.
Select Edit Channel Map and press OK (Enter) on the Installer
Remote to edit the Channel Map, as necessary. Channel edit options
will be displayed in a pop-up window (see example at right). Use the
Up/Down arrow keys to navigate between elds:
• Input & CH: Edit the channel lineup, as necessary, to include only
free to guest (non-encrypted) channels. Use the Left/Right arrow
keys to select channels, and press OK (Enter) to add/delete
channels per your system requirements.
• Icon: Use the Left/Right arrow keys or key in the icon number to
select the appropriate trademark/icon for each channel’s Channel-
Time on-screen display. Icons are available for familiar channels,
such as ABC, CBS, NBC, etc. Identiable icons should enable the
end user to readily know what common networks are available.
• Label: Press OK (Enter) to display the alphanumeric keypad,
and add custom text labels for each channel, as desired. Added
custom labels will be displayed above the Label/Keypad eld for
each channel, as applicable.
• Bank: Use the arrow keys to dene channel banks, as desired. See
pages 29 to 32 for further information on channel banks.
When you are nished, press MENU to close the pop-up window.
Use the arrow keys to select Next, and then press OK (Enter).
Note: You can also edit/add channel icons and/or custom text labels
in 2-5-4 + MENU Mode after the Express Script is completed, if
necessary. See page 28 for further information.
Note: If access to the channel lineup will be limited at the completion
of the Express Script (see step 5) and you would like to set up chan-
nel banks at a later time, you will need to set Installer Menu item 028
CH. OVERIDE to 1 to enable access to the Channel Preview/Banks
Setup Menu.
Express Script Installer Menu Wizard (Cont.)
(Continued on next page)
Installer Menu Wizard
Step 7. Channel Map Edit
Edit Channel Map.
PTC: V1.00.029 CPU: V03.50.00.01 ASIC: D279
Back
Next
1
►
2
►
3
►
4
►
5
►
6
►
7
►
8
Would you like to edit channel map and icons?
OK
Exit Express Script
CC
Installer Menu Wizard
Step 7. Channel Map Edit
Edit Channel Map.
PTC: V1.00.029 CPU: V03.50.00.01 ASIC: D279
Back
Next
1
►
2
►
3
►
4
►
5
►
6
►
7
►
8
Would you like to edit channel map and icons?
OK
Exit Express Script
CC
•
Input & CH
•
Icon
•
Label
•
Bank
DIGITAL 2-1
Keypad
No Logo
►
►
Add/Delete
Exit
MENU
NORMAL
1
ADDED
2
ADDED
3
ADDED
4
ADDED
* You can use either spinner or numeric key
to choose the icon.
(#0~#212 icon)
Searched CH: 1/Added CH: 128
* Available to add up to 141 CH