Filter
Top Products
10
206-4207
Pro:Centric Operation (Cont.)
Pro:Centric Setup
Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be
specied on the TVs.
On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/
administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the
Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric server Admin Client.
The Data Channel and Pro:Centric Application Mode can be set using one of the following methods:
• If the TV is in Pass-through Mode, set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL
to the appropriate values. Refer to “Installer Menu” information on pages 19 to 27 for further details. Also,
as necessary, refer to “Custom Master TV Setup” information on pages 15 to 18 and/or cloning information
on pages 33 to 41.
• If the TV is in FTG Mode (via CPU or EBL), use the appropriate software to update the Pro:Centric and
Data Channel Installer Menu items, and then transfer the FTG Installer Menu settings to the TV in
accordance with the FTG Mode of conguration. Refer to FTG Mode information on pages 42 to 53 for
further details.
Note: If using a Pro:Centric pillow speaker, also set Installer Menu item 027 HOSPITAL MODE to the
required value.