Filter
Top Products
60
206-4207
Note: Even if Scan Mode is enabled, the front panel channel keys cannot be used to turn ON the TV.
Note: The power indicator on the front panel of the TV has two different settings: one for when the TV is
in standby and one for when the TV is turned ON. The Power Indicator option in the Option Menu enables
you to dene the behavior of the power indicator. For LQ630H TVs, the Standby Light default is OFF, while
the Power Light default is ON. Note, however, if an LQ630H TV is in the default Hospital Mode, it is not
possible to change the Power Indicator settings. This means that for LQ630H TVs, when Installer Menu
Item 027 HOSPITAL MODE is set to 254, the power indicator will retain its default settings regardless of
any changes made via the Power Indicator option in the Option Menu. For CQ610H TVs, both the Standby
Light and Power Light defaults are ON, and the Power Indicator settings are not affected by the Hospital
Mode.
Speaker Selection
The following table outlines speaker settings as determined by Installer Menu items 027 HOSPITAL
MODE and 020 FEATURE LEVEL.
Item 027 HOSPITAL
MODE Value
Item 020 FEATURE
LEVEL Value
Audio Menu
TV Speaker
Speaker
0 0 ~ 24 OFF None
0 0 ~ 24 ON TV Only
0 64 ~ 65 N/A Pillow Only
1 ~ 34 N/A N/A Pillow Only
65 ~ 98 N/A OFF None
65 ~ 98 N/A ON TV Only
129 ~ 162 N/A OFF Pillow Only
129 ~ 162 N/A ON Pillow & TV
Note: If the TV is in FTG Mode, the Audio Menu is no longer accessible.
Reference: LQ630H/CQ610H Hospital Operations (Cont.)