Filter
Top Products
5
SET-UP GUIDE
1. Have the weather station and remote sensor 3 to 5 feet
apart.
2. Batteries out of both units for at least 10 minutes.
3.
Place the batteries into the remote sensor FIRST then
place batteries into the weather station NEXT.
(All remote sensors must be started before the weather station)
4. DO NOT PRESS ANY BUTTONS FOR 10 MINUTES
In this time the weather station and sensor will start to talk to each
other and the display will show both the indoor temperature and an
outdoor temperature ALTERNATELY. If the weather station does
not display both temperatures after the 10 minutes, Please retry the
start up as stated above. After both indoor and outdoor
temperatures are displayed for 10 minutes you can place your
remote sensor outdoors and set your time.
The remote sensor should be placed in a dry, shaded area. The
remote sensor has a range of 80 feet. Any walls or objects that the
signal will have to pass through will reduce distance. An outdoor
wall or window will have 20 to 30 feet of resistance and an interior
wall would have approximately 20 feet of resistance. Your distance
plus resistance should not exceed 80 ft. in a straight line. For best
results try and keep the remote sensor on an exterior wall of the
room that you have the weather station in.