Filter
Top Products
21
II. TROUBLESHOOTING
Problem:
No reception of WWVB time signal
Solution:
1) Wait overnight for signal.
2) Be sure Weather Station is at least 6 feet from
any electrical devices, such as televisions,
computers, or other radio-controlled clocks.
3) Remove batteries for five minutes, reinsert and
leave alone without pressing buttons overnight.
4) If there are still problems, contact La Crosse
Technology
Problem:
Hour is incorrect (minute and date are correct)
Solution:
Be sure correct time zone and daylight saving
time is selected.
Problem:
The LCD is faint
Solution:
1) Set the LCD contrast to a higher number
2) Replace batteries
Problem:
No outdoor temperature is displayed when
optional remote sender is used.
Solution:
1) Remove all batteries, reinsert into sensor first,
then display.
2) Place remote sensor closer to display.
3) Be sure all batteries are fresh.
Note: For problems not solved please contact La Crosse
Technology