Filter
Top Products
11
H. SELECTING °F OR °C
1. °F should be flashing in the time LCD.
2. Press and release the “CH/+” button to select
between °F and °C.
3. Press and release the “MODE/SET” button to
confirm and advance to the weather forecast
sensitivity setting.
I. SETTING THE WEATHER FORECAST
SENSITIVITY (hPa)
Note: A higher hPa (Hecto Pascal) setting decreases the
forecasting sensitivity of the unit. This feature is available for
people living in areas where the air pressure changes significantly
(not necessarily related to a change of weather). A lower hPa
setting is available for areas with a more constant air pressure.
This designates that it takes 2 hPa of pressure change to change the
forecast icon. Note that 1 hPa = 0.03 inHg (Inch Column of
Mercury) change. 1hPa = 1 mb (millibar). The hPa options that
appear in the pressure LCD are “2” hPa = 0.06 inHg, “3” hPa =
0.09 inHg and “4” hPa = 0.12 inHg.
1. “3” should be flashing in the pressure LCD.
2. Press and release the “CH/+” button to select one of
the three hPa settings. “2” is the lowest setting,
designated for areas with a relatively constant air
pressure, “3” is the mid-range setting, and “4” is the
highest setting, designated for areas with significant
air pressure changes.
3. Press and release the “MODE/SET” button to
confirm and advance to set the relative or absolute
display setting.