Filter
Top Products
18
III. OUTDOOR REMOTE CONTROL SENSORS
TX4U included (others are optional)
The WS-7059SU is able to receive signals from 3 different remote
sensors. When the TX4U and/or other units are set up the indoor
LCD will display the remote sensors when the “IN/OUT” button is
pressed. The weather station will switch to display “OUTDOOR”
when a remote sensor is selected and will also show which number
of remote sensor is displayed in between the temperature and
humidity displays.
Extra sensors can be purchased through the same dealer as this
unit. A TX4U will monitor the temperature and humidity, a TX3U
will monitor the temperature only and the TX3UP will monitor the
temperature only via a probe (for soil or water temperature).
Note: When setting up multiple units it is important to insert
batteries first into all the remote sensors and then into the weather
station. You should not press any buttons for the first 10 minutes
of operation. Transmission problems will arise if this is not done
correctly.
IV. VIEWING AND OPERATING WITH MULTIPLE
REMOTE SENSOR UNITS
1. To view the outdoor data press and release the
“IN/OUT” button. If there is more than one remote
sensor unit in use a squared number will appear
between the outdoor temperature and the humidity.
2. To switch to a different remote sensor unit press and
release the “CH/+” button.