Filter
Top Products
Basic Operations
23
Basic Operations
Practice starting and stopping a video you've rented - play it through, see
how it automatically rewinds. Get a blank tape and try recording a TV
show. Then you'll know how to use the VCR when you need to - or where
in the manual to find the instructions you forgot. Let's go!
Viewing a Videocassette
To play Back a Recorded Tape
1. Insert the cassette, arrow-side forward, into the slot at the front of the
VCR. The power comes on automatically and the tape indicator lights on
the display.
2. Turn on the TV and select the video channel (3 or 4) using the number
buttons on the TV's remote control.
3. Press PLAY to start the tape.
4. Press STOP to end play.
Direct Video Input to the TV
Normally you would select channel 3 or 4 on the TV to receive a signal
from the VCR. You can get an even better picture if your TV has an
auxiliary video input feature and if the TV and VCR have a direct video-to-
video hookup. If this is the case, do not select channel 3 or 4. Instead:
Press the AUX or VIDEO button on the TV's remote control to select the
proper input channel for playback.
To Fine Tune the Picture
Auto Tracking
Pressing PLAY starts the auto tracking feature, which adjusts the tuning to
eliminate static lines that may appear on the screen.
Manual Tracking
Scratched tapes or poorly recorded tapes may require additional picture
adjustment. You can do this with the remote control. Press either 1 or 4
button until picture clears up.
After operating the tracking manually, eject the tape and reinsert it to
reactivate auto tracking.
If you press the DISPLAY button when viewing a videocassette, the
display, as shown, appears for several seconds so you can see the
functions of the number buttons on the remote control.
1: TRACKING + 3: SLOW +
4: TRACKING - 6: SLOW -
9: FRAME ADVANCE
The above functions always work when you are viewing a videocassette
even if the display, as shown, is not displayed.