Filter
Top Products
Advanced Operations (Second VCR)
44
Insert a blank or erasable tape (with the safety tab intact) into VCR1.
Press AVX on VCR1 - the LINE indicator will display.
Press REC on VCR1, and press PLAY on VCR2.
To monitor the picture as you record, VCR1 must be connected to your TV
(follow instructions in the other VCR's manual). Press the VCR/TV button
on the remote. The VCR indicator will light on VCR1's display and you
can view the picture being recorded.
Copying Tapes From a Camcorder
If you would like to copy a video tape shot in your camcorder onto your
VCR here's how to do it.
Connect the camcorder's AV output cable to your VCR. (see diagram
below)
Camcorder Hookup Illustration
Press the AVX button on the VCRs remote control so that the L2 (Line)
indicator appears in the VCR display.
Press REC/IRT on the VCR to start recording.
Press PLAY on your camcorder to start copying your tape.
Information on Audio Hookup
If your camcorder is only capable of monaural output (one audio jack)
connect it to the AUDIO IN L input on the front of the VCR.