Filter
Top Products
CONVENTIONAL MODE OPERATION
The radio functions in the conventional mode when
using conventional communications channels (non-
trunked). Each channel consists of a preset frequency
pair for transmit and receive during repeater operation,
or a single frequency for both transmit and receive during
talk-around (no repeater) operation. To use this mode,
the operator selects a conventional system which in-
cludes one or more conventional channels. Each conven-
tional channel may have one or more features, such as
Channel Guard, programmed when the channel is se-
lected.
The CLEAR/MONITOR button unmutes the receiver
so activity on the selected channel can be monitored.
When pressed and held for approximately 3 seconds this
button toggles conventional channel decoding (Channel
Guard, Digital Channel Guard or T99) on and off if
programmed for the selected channel.
SQUELCH ADJUST
(256K & UP VERSION RADIOS ONLY)
In the conventional mode of operation, the squelch
may be re-adjusted in the MENU selection mode or from
a front panel key on the keypad that has been pre-pro-
grammed by the PC programming software. A default
value of 9 or any user level between 1 and 16 can be
selected by the PC programming software. The user can
change this setting either of two ways from the front panel
keys.
89