Filter
Top Products
order, or to select a set (bank) of
groups for SYSTEM/GROUP/
CHANNEL knob selection (depend-
ing on programming). See SYSTEM/
GROUP/CHANNEL SELECTION
for details.
Toggles scan operation on and off.
When the radio is scanning, is
on and all groups or channels in the
scan list of the currently selected
system are scanned.
Adds or deletes selected groups or
channels from the scan list of the cur-
rently selected system. See the
trunked and conventional scan sec-
tions for details.
The Status key is used to send a pre-
programmed status message to the
EDACS site.
The Message key is used to send a
pre-programmed status message to
the EDACS site.
Used to place a telephone call
through the radio by selecting the
telephone interconnect special call
function. See Telephone Intercon-
nect Calls for details.
Used to call an individual or make an
all-call by selecting the individual call
SCN
21