Filter
Top Products
2. When a group on the scan list receives a channel
assignment, the radio unmutes on the assigned
channel and comes on. Line one shows
GR
followed by the logical ID number (if received) of the
unit sending the message, or the associated name
if the ID number is found in the individual call list. The
group name displays on line two.
-
If the radio detects a call from the currently selected
group, it has priority and the radio will switch to the
selected group call.
-
The radio will continue scanning if a new group is
selected when scan is on.
-
Pressing the PTT button when scan is on will cause
the radio to transmit on the displayed group or to the
currently selected group (depending on program-
ming).
-
Pressing when scan is on will cause the radio
to recall the scanned group that was last received.
This group is recalled for a period equal to the scan
hang time.
Turning Scan Off
Toggle scan operation off by pressing . The
radio will resume operation on the selected group.
BSY
Scan will be disabled temporarily when an
emergency is declared.
NOTE
70