Filter
Top Products
EDACS TRUNKED MODE OPERATION
Digital trunking provides fast communication access
at all times, even during busy hours. In this mode the
operator selects a communications system and group,
and the audio communication or working channel (WC)
is allocated through digital signalling with the site.
RECEIVING A CALL
1. Turn on the radio by rotating the POWER ON-
OFF/VOLUME knob clockwise (out of detent). A
short alert signal (if enabled through programming)
indicates the radio is ready to use.
2. The display shows the last selected or the power up
(depending on programming) system and group
names and indicates if the radio has acquired the
system control channel by turning on . If the
radio is unable to obtain a control channel, line two
shows CC SCAN and will remain off.
3. Adjust the POWER ON-OFF/VOLUME knob to the
desired volume level.
4. Select the desired system and group. The display
indicates the current system and group names.
5. The radio is now ready to receive calls.
SVC
SVC
61