Filter
Top Products
INDIVIDUAL CALLS
Receiving And Responding To An Individual Call
(Trunked Mode Only)
When the radio receives an individual call (a call
directed only to the user’s radio), it unmutes on the
assigned working channel and turns on the indi-
cator. Line one shows ID followed by the logical ID
number of the unit sending the message, or the associ-
ated name if the ID number is found in the individual call
list. The individual call indicator display
*INDV*
is dis-
played on line two. The radio can be programmed to ring
when an individual call is received. If enabled, the ring
begins five seconds after the caller unkeys and will
continue until the PTT button, the CLEAR button or
is pressed.
If a response is made to the call prior to the pro-
grammed call-back time-out, the call will automatically be
directed to the originating unit. If a response is not made
before the call-back time-out, the radio will return to
normal receive mode, but will be displayed. If the
caller’s ID is not received,
UNKNOWN
will display for the
duration of the call and there will be no call-back hang-
time.
To respond after the call-back time-out, press the
key. The radio’s display will show the caller’s ID
on the first line and
WHCI=1
on the second line. Pressing
the PTT button at this point will initiate an individual call
back to the original caller. (If the last call was a group
call, the display will show
WHCG=1
. Pressing the PTT
button will place the call as an individual call.) The radio
BSY
WHC
72