Filter
Top Products
Pressing the button when the desired state is
displayed chooses the new ProFile state. The display
then returns to the system/group display. If a selection
is not made before the display time-out time the current
menu selection becomes the new selection. If a selec-
tion is not made before the
CLEAR
button is pressed,
the pre-menu state remains active.
Option Availability
If the ProFile Select Option is not in the menu list,
mapped to a key, or part of a macro, the option will not
be available. Also, if the radio is in one of the following
modes, ProFile is not available:
•
Radio Disabled
•
Conventional Failsoft
ProFile Off terminates any ongoing
conversation(s) with ProFile Manager. If this
occurs ProFile Manager must restart
communication with the radio from the beginning
- it does NOT restart where it was interrupted as
DATA OFF does.
If the MDT cable is not attached when ProFile On
is selected, DATA ON shows on the menu screen
for two seconds; and the radio is now capable of
receiving ProFile data - calls.
If the MDT cable is attached when ProFile On is
selected, DATA ON will not be displayed.
NOTE
84