Filter
Top Products
SPC ON - indicates the radio is in the special
call select/entry mode (Individual or Tele-
phone Interconnect).
HI ON - indicates the selected group or chan-
nel is selected to transmit at high power.
OFF - indicates the selected group or
channel is selected to transmit at low
power.
XMIT ON - indicates the radio is transmitting.
When operating in a trunked system, the
radio may be programmed to automat-
ically transmit (without pressing PTT) to
maintain digital communication with the
site controller. will turn on whenever
the radio is transmitting.
SCN ON - indicates the scan mode is enabled.
FLASHING - indicates Scan is temporarily
disabled.
S ON - indicates the selected group or chan-
nel is in the scan list.
1 ON - (conventional mode only) indicates
the selected channel is designated as the
priority-one scan channel.
2 ON - (conventional mode only) indicates
the selected channel is designated as the
priority-two scan channel.
XMIT
30