Filter
Top Products
text selection can also be cancelled by pressing the
CLEAR button prior to the time-out period.
To view the currently selected message text after it
has been transmitted, press the key and then the
CLEAR button prior to the time-out period. If the message
text was not sent successfully to the site, the text asso-
ciated with the message will flash in the display.
EDACS CONVENTIONAL P1 SCAN
This feature permits the radio user to scan a pre-pro-
grammed conventional system and channel as a Priority
1 (P1) channel while the radio is selected for EDACS
trunked system. If activity is detected on the conventional
P1 channel, the radio will unmute and remain on this
conventional channel for the programmable hang time.
The radio must be pre-programmed to designate a
key for scan on/off operation.
DYNAMIC REGROUP OPERATION
Dynamic group operation permits multiple talk groups
(up to eight) to be added to a radio via the system
manager. The radio must be pre-programmed to re-
spond to regrouping. Dynamic regrouping will not be
activated in a radio until an activation message is sent by
the system manager. Each radio that receives and ac-
knowledges the regrouping instructions is successfully
regrouped.
Pressing and holding the CLEAR/MONITOR button
for 2.5 seconds toggles the user into and out of the
dynamic regroup groupset. A double beep will sound for
87