Filter
Top Products
13
3. DEVICE OPERATION
• Auto cue function:
When the pickup returns to the playback start point after you press the CUE button during
playback, the playback sound at the top of the target track is detected, and the pickup moves
to the point where the playback sound starts and playback starts. (See page 13)
PRESET FUNCTIONS AND OPERATIONS
Changing the PRESETS
6.
1.
2. 3. 4. 5.
1. Press and hold the DISP/MENU button for about 2 seconds in stop mode.
• The unit enters in preset menu mode.
2. Turn the FOLDER/TRACK jog wheel to select the preset item you wish to modify.
Power On
↔ Repeat Play ↔ Auto Cue ↔ MIC Mute ↔ Paging ↔ Mono ↔ Default
(factory setting
↔ F/W Version
3. Press the FOLDER/TRACK jog wheel to confirm your selection.
• Preset setting data flash on the display.
4. Turn the FOLDER/TRACK jog wheel to select the setting of the preset item.
5. Press the FOLDER/TRACK jog wheel to confirm your setting.
Repeat steps 2 to 5 as needed.
6. Press the DISP/MENU button to save changes after making settings.
• During saving "Executing" is displayed.
• When saving is finished, "Completed" is displayed on the display unit for 1 second.
“F/W Version” is excluded.
• Press the 9 button in the preset menu mode to cancel the settings and to return to the
stop mode.
Table of Preset Items and Default settings
No
Display Setting items Contents
1.
Power On
Play The unit starts to play after boot procedure is completed.
Stop
(Default)
The unit sits in stop mode after boot procedure is completed.
2.
Repeat Play
On The unit sets the repeat playback on. (See page 11)
Off
(Default)
The unit sets the repeat playback off.
3.
Auto Cue
On
The unit detects the playback sound of the top of the target track when the
pickup returns to the playback start point after you press the CUE button
during playback, and the pickup returns to the point where the playback
sound starts. (See page 12)
Off
(Default)
The unit does not detect the playback sound of the target track when
the CUE button is pressed during playback, and the pickup returns to the
playback start position.
4.
MIC Mute
On
(Default)
The unit automatically mutes the microphone input when microphone input
level is -60 dBV or less.
Off The unit sets the microphone input mute mode off.
5.
Paging
On
(Default)
The unit sets the playback audio output level muted by 20 dB automatically
when a microphone is used.
Off
The unit sets audio output level mute mode to off when a microphone is
used.
6.
Mono
On
The unit outputs L and R mixed signals from the output jacks.
Off
(Default)
The unit outputs L and R signals from the output jacks.
7.
Default –
The unit returns the preset data to the default values (the value when you
purchased).
8.
F/W Version
F/W Version The unit displays the firmware version.