Filter
Top Products
11
3. DEVICE OPERATION
Repeating playback
4.
1.
2. 3.
Repeat playback in each playback mode can be set. (See page 13)
1. Hold the DISP/MENU button pressed for about 2 seconds.
• Preset menu mode is activated.
2. Display “Repeat Play” with the FOLDER/TRACK jog wheel, then press the wheel.
3. Select “On” with the jog wheel, then press the wheel.
• Repeat playback is set.
• To release repeat playback, select “Off”.
4. Press the 2 / ; button.
• Repeat playback starts.
Repeating playback of a specific section within a track (A-B repeat)
1.
2.
1. During playback, press the A button at the point where you want to start repeat playback
(A point).
• The “A-” indicator flashes on the display.
• After setting the A point, press the A button during playback. Playback will start from the
A point.
2. During playback, press the B button at the point where you want to end repeat playback
(B point).
• The "A-B" and "RE" indicators light, the "LOOP" indicator flashes, and A-B repeat playback
starts.
• If A-B repeat playback is set in random playback mode or repeat playback mode, each
mode is temporarily canceled.
• To release A-B repeat playback, press the EXIT/RELOOP button.
• If the 9 button is pressed after the A-B section is set, A-B repeat playback is canceled.
• If the EXIT/RELOOP button is pressed again after canceling the A-B repeat playback, the
A-B repeat playback restarts.
• If the A or B button is pressed while the TIME/CLEAR button is held pressed after the A-B
section has been set, the A and B points or B points are canceled.
• If the A button is pressed while the TIME/CLEAR button is held pressed after the A point
has been set, the A point is canceled.
• If the power is turned off after setting the A-B section, the A-B section setting is
canceled.
• When the A-B section is canceled, the previous playback mode is resumed.
Warning!
• If the track is VBR, the A-B section setting is disabled.
(“VBR” is displayed on the display for about 3 seconds.)