Cisco Systems 1.1 MP3 Player User Manual


 
2-20
User Guide for Cisco Digital Media Player Device Manager 1.1
OL-13985-01
Chapter 2 Using DMPDM
Using Administrative Options
Using Administrative Options
Topics in this section explain administrative tasks in DMPDM:
Editing the DMPDM User Account, page 2-20
Editing the DMP Service (ftp) User Account, page 2-20
Saving Settings That You Configured, page 2-21
Restoring Factory Default Settings, page 2-21
Restarting Your DMP, page 2-22
Upgrading the DMP Firmware, page 2-22
Editing the DMPDM User Account
You can change the username, the password, or both, that you use when you log in to DMPDM.
Step 1 In the Administration list, click DMP Web Account.
Step 2 Enter or edit the required values, as described in Table 2-13.
Step 3 To confirm that you are satisfied with the entries or changes that you made and to record them in volatile
memory, click Apply.
After you click Apply, the entries or changes take effect. However, the previously defined values will
return the next time that your DMP restarts.
Step 4 (Optional) To put all changed values into effect permanently, so that they persist even after your DMP
restarts, select Administration
> Save Configuration and, when the Save Configuration page appears,
click Save.
Editing the DMP Service (ftp) User Account
If you configured your DMP to run the FTP service, you can create a user account with FTP login
privileges. For information about enabling the FTP service, see
Enabling or Disabling Types of Access
to Your DMP, page 2-11.
Step 1 In the Administration list, click DMP Service Account.
Step 2 Enter or edit the required values, as described in Table 2-14, then click Apply.
Ta ble 2-13 GUI Elements on the DMP Web Account Page
Element Description
DMP Web Account
User Name The login name for DMPDM.
Password The password that is associated with the DMPDM username. You must enter the password two
times on the DMP Web Account page to confirm that you typed it correctly.
Repeat Password