Filter
Top Products
36
➮ Press the OK button :.
A countdown is shown in the display.
Afterwards you will hear a test sound
and calibration begins.
Note:
Follow the instructions shown in the dis-
play during calibration!
Manually adjusting the equalizer
Notes on adjusting the settings
We recommend you use a CD that you
are familiar with for making changes to
the settings.
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate X-BASS. For fur-
ther information, please read the
“Sound” chapter.
➮ Listen to a CD.
➮ What kind of impression does the
sound make?
➮ Now refer to the “Sound impres-
sion” column in the table entitled
“Help adjusting the equalizer”.
➮ Adjust the equalizer values as de-
scribed in the “Measures” column.
Making adjustments
➮ Press the DEQ button ?.
➮ Press the or button 7 repeat-
edly until “MANUAL EQ” appears in
the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until the equalizer that you
want to configure (“USER EQ1”,
“USER EQ2” or “USER EQ3”) ap-
pears in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until the equalizer band that
you want to configure (“LOW EQ1”,
“LOW EQ2”, “HIGH EQ1”, “HIGH
EQ2” or “HIGH EQ3”) appears in
the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until the frequency that you
want is displayed.
➮ Press the OK button :.
The top line displays the GAIN and the
quality factor “Q”. The gain setting flash-
es. You can use the quality factor to set
the width of the filter. The higher you
set the value for the quality factor the
more directly the filter will be applied to
the selected frequency.
To adjust the gain,
➮ press the or button 7.
To adjust the quality factor,
➮ press the button 7.
The quality factor setting flashes.
➮ Press the or button 7 repeat-
edly until the setting that you want
is displayed.
EQUALIZER