Filter
Top Products
13
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Selecting the waveband /
memory bank
Selecting the waveband / memory bank
You can use this device to receive pro-
grammes broadcast over the FM and
AM wavebands. There are three mem-
ory banks (FM1, FM2 and FMT) for the
FM waveband and two memory banks
(AM and AMT) for the AM waveband.
Six stations can be stored in each mem-
ory bank.
To switch between the FM1, FM2 and
FMT memory banks,
➮ briefly press the FM•TS button 4.
To switch between the AM and AMT
memory banks,
➮ briefly press the AM button =.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮ Press the or button 7.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
● You can only tune into stations
manually if the RDS function is de-
activated.
➮ Press the or button 7.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮ Press the MENU button 9.
“TUNER MENU” appears in the display.
➮ Press the OK button : to display
the tuner menu.
➮ Press the or button 7 repeat-
edly until “SENS” appears in the
display.
The display shows the currently set sen-
sitivity level. “SENS HI3” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮ Set the sensitivity level that you
want using the
buttons 7.
When you have finished making your
changes,
➮ press the MENU button 9.
Note:
● You can set different sensitivity lev-
els for FM and AM.
RADIO MODE