Blaupunkt MP54 MP3 Player User Manual


 
20
Note:
In the menu you can configure
whether you want to display the
CD text or the CD name. For fur-
ther information, please read the
following section entitled “Display-
ing CD text”.
CD text can only be displayed if the
appropriate information is con-
tained on the CD. The CD name
can only be displayed if you have
already named the CD. For further
information, please read the sec-
tion entitled “Naming CDs”.
To switch between the display options,
press the DIS•ESC button 8 once
or several times until the display
that you want appears.
Displaying CD text/CD name
Some CDs include CD text. The CD text
might contain the names of the artist,
album and tracks.
The CD text is displayed in the second
line of the display instead of the CD
name. You can allow the CD text to be
displayed as scrolling text every time
you switch to another track. The default
display will appear again after the whole
CD text has been shown once. For fur-
ther information, please read the sec-
tion entitled “Changing the display”.
Switching CD text on/off
Press the MENU button 9.
Press the or button 7 repeat-
edly until “VARIOUS MENU” ap-
pears in the display.
Press the OK button :.
Press the or button 7 repeat-
edly until “CD TEXT” or “CD
NAME” appears in the display.
Use the buttons 7 to switch
between the “CD TEXT” and “CD
NAME” options.
When you have finished making your
changes,
press the MENU button 9.
Scrolling CD text
If the CD that is inserted in the drive
contains CD text, you can make the
system display the text as scrolling text
during playback.
Briefly press the 1 SCL button 6.
Naming CDs
The car sound system allows you to
assign names for up to 30 CDs so that
you can recognise them more easily.
The names can be up to eight charac-
ters long. “CD NAME FULL” will appear
in the display if you try assigning more
than 30 names.
Entering/editing CD names
Listen to the CD that you want.
Press the MENU button 9.
Press the or button 7 repeat-
edly until “VARIOUS MENU” ap-
pears in the display.
Press the OK button :.
Press the or button 7 repeat-
edly until “CD NAME EDIT” ap-
pears in the display.
CD MODE