Blaupunkt MP54 MP3 Player User Manual


 
29
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on
all the inserted CDs in ascending order,
press and hold down the OK but-
ton : for longer than two sec-
onds.
“SCAN” and the selected display mode
appear alternately in the display.
Stopping SCAN
To stop scanning,
briefly press the OK button :.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time. For
further information, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
Press the 6 button ;.
“PAUSE” appears in the display.
Cancelling pause
Press the 6 button ; while in
pause mode.
Playback is resumed.
Naming CDs
The car sound system allows you to
assign names for up to 30 CDs so that
you can recognise them more easily.
The names can be a maximum of sev-
en characters long.
“CD NAME FULL” will appear in the dis-
play if you try assigning more than 30
names.
Entering/editing CD names
Listen to the CD that you want.
Press the MENU button 9.
Press the or button 7 repeat-
edly until “VARIOUS MENU” ap-
pears in the display.
Press the OK button :.
Press the or button 7 repeat-
edly until “CD NAME EDIT” ap-
pears in the display.
Press the OK button :.
You will now enter editing mode. If your
CD does not have a name yet, “ABC-
DEFG” appears in the display.
The currently active text input position
flashes.
Use the / buttons 7 to select
the character that you want. If you
want an empty space, simply se-
lect the underscore.
Use the or button 7 to move
from one text input position to an-
other.
When you have finished making your
changes,
press the MENU button 9.
CD CHANGER MODE