Filter
Top Products
39
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Adjusting the viewing angle
You can adjust the display’s viewing
angle to suit the installation position of
the device in your vehicle.
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “DISPLAY MENU” ap-
pears in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “ANGLE” appears in the
display with the current setting.
➮ Press the or button 7 to ad-
just the viewing angle.
When you have finished making your
changes,
➮ press the MENU button 9.
Setting the display illumination
colour (only Acapulco MP54)
When setting the display illumination,
you can choose one of four preset col-
ours or you can mix a colour yourself
from the RGB spectrum (red-green-
blue) or you can select a colour during
a colour scan.
Selecting a preset colour
Four different colours are already stored
in the device. “Ocean” (blue), “Amber”,
“Sunset” (red-orange) and “Nature”
(green) are available. Select a colour
that best suits your vehicle interior.
➮ Press the or button 7 repeat-
edly until “DISPLAY MENU” ap-
pears in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “DISPLAY COLOR” ap-
pears in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until the colour that you want
is displayed.
When you have finished making your
changes,
➮ press the OK : button and then
the MENU button 9.
The settings are saved.
Mixing a colour for the display
illumination
To customise the display illumination to
suit your tastes you can mix a colour
yourself using the three primary colours
red, blue and green.
➮ Press the or button 7 repeat-
edly until “DISPLAY MENU” ap-
pears in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “DISPLAY COLOR” ap-
pears in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “USER COLOR” appears
in the display.
➮ Press the OK button :.
The menu for mixing your own colour is
displayed. The top line displays “R”, “G”
and “B” with the current values. The “R”
setting flashes.
ADJUSTING THE DISPLAY SETTINGS