99
Printer Configuration and Adjustment
User Menus—TOOLS Menu
4/8/14 ZT400 Series™ User Guide P1066582-002
Enable Communication Diagnostics Mode
Use this diagnostics tool to cause the printer to output the
hexadecimal values for all data received by the printer.
See Communication Diagnostics Mode on page 75 for more
information.
Is ZBI Enabled?
This menu item indicates if the Zebra Basic Interpreter (ZBI 2.0™)
option is enabled on your printer. If you would like to purchase this
option, contact your Zebra reseller for more information.
See Enable ZBI on page 76 for more information.
Run a ZBI Program*
If ZBI programs exist on your printer, they are listed. If no
program exists,
NONE is listed.
If you wish to run a ZBI program that you have downloaded to
your printer:
1. Use the UP ARROW or DOWN ARROW to select the file from
this menu.
2. Press RIGHT SELECT to select RUN. If no program exists, the
RUN option does not perform an action.
See Run a ZBI Program on page 76 for more information.
* This menu item appears only if ZBI is enabled on your printer
and no ZBI program is running.
Stop a ZBI Program*
If a ZBI program is running, the printer lists it. If you wish to stop
the program, press
RIGHT SELECT to select STOP.
See Stop a ZBI Program on page 76 for more information.
* This menu item appears only if ZBI is enabled on your printer
and a ZBI program is running.
▼
DIAGNOSTIC MODE
DISABLED
▲
▼
RUN ZBI PROGRAM
(*NONE*)
▲
RUN
▼
STOP ZBI PROGRAM
(*NONE*)
▲
STOP
