Printer Configuration and Adjustment
User Menus—NETWORK Menu
104
P1066582-002 ZT400 Series™ User Guide 4/8/14
Set the Printer’s IP Address*
View and, if necessary, change the printer’s IP address.
Changes are saved only if WIRED IP PROTOCOL on page 103 is
set to
PERMANENT. To allow any saved changes to take effect,
use RESET NETWORK on page 106 to reset the print server.
See IP Address on page 77 for more information.
* This menu item appears only if a wireless print server is
installed in your printer.
Set the Subnet Mask*
View and, if necessary, change the subnet mask.
Changes are saved only if WIRED IP PROTOCOL on page 103 is
set to
PERMANENT. To allow any saved changes to take effect,
use RESET NETWORK on page 106 to reset the print server.
See Subnet Mask on page 77 for more information.
* This menu item appears only if a wireless print server is
installed in your printer.
Set the Default Gateway*
View and, if necessary, change the default gateway.
Changes are saved only if WIRED IP PROTOCOL on page 103 is
set to
PERMANENT. To allow any saved changes to take effect,
use RESET NETWORK on page 106 to reset the print server.
See Gateway on page 77 for more information.
* This menu item appears only if a wireless print server is
installed in your printer.
Set the IP Resolution Method*
This parameter tells if the user (permanent) or the server (dynamic)
selects the IP address. When a dynamic option is chosen, this
parameter tells the method(s) by which the wired or wireless print
server receives the IP address from the server.
See IP Protocol on page 78 for more information.
* This menu item appears only if a wireless print server is
installed in your printer.
▼
WLAN IP ADDRESS
000.000.000.000
▲
NEXT
▼
WLAN SUBNET MASK
000.000.000.000
▲
NEXT
▼
WLAN GATEWAY
000.000.000.000
▲
NEXT
