Printer Configuration and Adjustment
User Menus—SETTINGS Menu
96
P1066582-002 ZT400 Series™ User Guide 4/8/14
Set the Maximum Label Length
Set the maximum label length to a value that is at least 1.0 in.
(25.4 mm) greater than the actual label length plus the interlabel
gap. If you set the value to one that is smaller than the label length,
the printer assumes that continuous media is loaded, and the printer
cannot calibrate.
See Maximum Label Length on page 70 for more information.
Select the Display Language
If necessary, change the language that the printer displays. See
Language on page 83 for more information.
Note • The selections for this parameter are displayed in
the actual languages to make it easier for you to find one
that you are able to read.
Tools Menu Shortcut
• To be taken to the next user menu, press OK or press
RIGHT SELECT to select GO.
• To continue to navigate in the same user menu, press the
LEFT ARROW or RIGHT ARROW.
GO
PRINT INFORMATION
SETTINGS
START
▼
LANGUAGE
ENGLISH
▲ ▼
DARKNESS
10
▲
START
GO
