79
Printer Configuration and Adjustment
Adjust Printer Settings
4/8/14 ZT400 Series™ User Guide P1066582-002
Channel View the wireless channel being used when the wireless network is active and
authenticated.
Accepted values:
N/A
Related ZPL command(s):
none
SGD command used:
wlan.channel
User menu item: CHANNEL on page 105
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
Signal View the wireless signal strength when the wireless network is active and authenticated.
Accepted values:
N/A
Related ZPL command(s):
none
SGD command used:
wlan.signal_strength
User menu item: SIGNAL on page 105
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
Reset Network This option resets the wired or wireless print server. You must reset the print server to
allow any changes to the network settings to take effect.
Accepted values:
N/A
Related ZPL command(s):
~WR
SGD command used:
device.reset
User menu item: RESET NETWORK on page 106
Printer web page: Print Server Settings > Factory Print Server Settings
Table 3 • Network Settings (Continued)
