73
Printer Configuration and Adjustment
Adjust Printer Settings
4/8/14 ZT400 Series™ User Guide P1066582-002
Head-Close
Action
Set the action for the printer to take when you close the printhead.
• CALIBRATE adjusts sensor levels and thresholds, determines the label length, and
feeds the media to the next web.
• FEED—feeds the labels to the first registration point.
• LENGTH determines the label length using current sensor values, and feeds the
media to the next web.
• NO MOTION tells the printer not to move the media. You must manually ensure
that the web is positioned correctly, or press feed to position the next web.
• SHORT CAL sets the media and web thresholds without adjusting sensor gain,
determines the label length, and feeds the media to the next web.
Accepted values:
• CALIBRATE
• FEED
• LENGTH
• NO MOTION
• SHORT CAL
Related ZPL command(s):
^MF
SGD command used:
ezpl.head_close_action
User menu item: HEAD CLOSE ACTION on page 98
Printer web page: View and Modify Printer Settings > Calibration
Head-Open Light Set the brightness of the light that turns on when the printhead is open.
Accepted values:
• HIGH
• MEDIUM
• LOW
• OFF
Related ZPL command(s):
N/A
SGD command used:
device.light.head_open_brightness
User menu item: HEAD OPEN LIGHT on page 98
Printer web page:
N/A
Cover-Open
Light
Set the brightness of the light that turns on when the media door is open.
Accepted values:
• HIGH
• MEDIUM
• LOW
• OFF
Related ZPL command(s):
N/A
SGD command used:
device.light.cover_open_brightness
User menu item: COVER OPEN LIGHT on page 98
Printer web page:
N/A
Table 2 • Calibration and Diagnostic Tools (Continued)
