A SERVICE OF

logo

41
Printer Setup and Operation
Load the Media—Tear-Off Mode
4/8/14 ZT400 Series™ User Guide P1066582-002
4. Close the media door.
5. Set the printer to Tear-Off mode (for more information, see Print Mode on page 69).
6. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
7. If desired, perform the CANCEL Self Test on page 163 to verify that your printer is able to
print.
Media loading in Tear-Off mode is complete.