A SERVICE OF

logo

ZQ110
Rev. 1.00
- 75 -
Mobile Printer Command Manual
GS I b
[Name]
[Format]
[Description]
[Notes]
Transmits battery status.
ASCII
GS
I
b
Hex
1D
49
62
Decimal
29
73
98
Transmits the battery power status of the printer
The transmitted battery status from this printer is constructed by [Header ~
NUL] as shown in the table below.
Transmitted data
Hex
Decimal
Amount of data
Header
37H
55
1byte
Identifier
45H
69
1byte
Battery remaining
30h-34H
48-52
1byte
NUL
00H
0
1byte
“Battery remaining amount“ is as indicated in the following table:
Battery remaining amount
Information
Hex
Decimal
30H
48
Battery remaining amount : H level
31H
49
Battery remaining amount : M level
32H
50
Battery remaining amount : L level
33H
51
Battery remaining amount : S level
You can confirm the battery remaining amount by looking at the battery
LED.
When battery remaining amount is S level, the red LED of battery LED is
blinking.
• This command following DLE can be executed in real-time command
mode.